BALTECH GmbH, Measurement thermal imaging camera, infrared cameras

Rovat: Műszaki cikk, elektronika » Egyéb

Elhelyezkedés: Külföld, Németország, Lübeck | Térkép Megtekintés térképen

A hirdetés feladásának ideje: 2017. 08. 22. 14:06

  • BALTECH_infrared_windows_measurement_devices__infrared_cameras_BALTECH_TR__4_.jpg
  • BALTECH_infrared_windows_measurement_devices__infrared_cameras_BALTECH_TR__2_.jpg
  • BALTECH_infrared_windows_measurement_devices__infrared_cameras_BALTECH_TR_18436__8_.jpg
BALTECH GmbH, Measurement thermal imaging camera, infrared cameras

Measurement thermal imaging camera


It is established that the heat loss in the room occur in the openings. According to statistics, 40% Windows, 20% on the roof. Moreover, most of the gaps are inaccessible to human eyes. To detect the defects in the building, execute the measurement by the imager. Having identified the gaps, they can be eliminated. Note that thermal imaging is a non-destructive way, i.e. you do not want to disturb the building structure.

Conditions for measurement

To obtain reliable and accurate data, you should know some of the nuances of measuring a thermal imager. The event should be carried out when:

• The temperature difference between indoors and outside is at least 10°C;

• There are no direct rays of the sun and in the street cloudy weather.

Therefore, the optimal time for conducting thermal imaging diagnostics is the period from September to may inclusive. Of course, measuring the thermal imager is not excluded, and in the summer, but will have the inside to cool/heat the room to reach the required temperature conditions.

Note that the error of installation and latent defects in the construction of other ways to identify. You can only do thermal imaging diagnostics. Measuring a thermal imager will allow to increase the efficiency of the heating system through the elimination of heat leaks and due to the additional sealing of the roof and Windows/doors.


Application practice shows the effectiveness of the use of the thermal imager not only in the detection of heat leaks from the house. Thermal imaging is able to detect and leak cold (!) of the refrigeration system. This gives you the opportunity to increase the energy efficiency of any building.

Take, for example, an electric substation. It is equipped with numerous heterogeneous elements:

• Electrical connections;

• Garlands of insulators;

• Switches;

• Transformers (power, measurement) and other installation.


The status of each item specified in the list should be continuously monitored. Before it was done the traditional measuring devices, but the process was time-consuming and extremely expensive. With the advent of thermal imagers simplified. It is established that if the transformer is not functioning in nominal mode, the temperature will exceed the initially specified. The imager is a fast fix. After experts will decide whether the equipment needs to be overhauled or it needs servicing.


The same procedure applies to the electrical connections. If you have a poor contact, there is a temperature that will permanently damage the connector down.


The advantages of measuring the thermal imager

The thermal survey has the following advantages:

• Cost-effectiveness. The price of diagnosis is almost 30% lower than the same standard of research;

• Simplicity. Remote examination does not require breaking the design object;

• Precision. The IR spectrum of the pinpoints on the locations of heat losses and their intensity;

• Safety. The method of control does not violate the environmental norms and are absolutely safe for the staff.

The company Baltech offers a simple and inexpensive infrared camera BALTECH TR-0110, BALTECH TR-0120, BALTECH TR-0140, BALTECH TR-0150, BALTECH TR-0170, BALTECH TR-0180 Zorro, certified in Russia, Germany and Kazakhstan.

Our Department of Technical Service (OTS), which was accredited as a laboratory for thermography and thermal diagnostics (got the certificate in July 2016.), perform thermal diagnostics of objects with our bodies.