BALTECH GmbH - Methodology of energy audit, infrared camera

Ár / bérleti díj: 10 000 Ft (HUF)

Rovat: Műszaki cikk, elektronika » Egyéb

Elhelyezkedés: Külföld, Németország, Lübeck | Térkép Megtekintés térképen

A hirdetés feladásának ideje: 2017. 10. 05. 11:00

  • BALTECH_infrared_windows_measurement_devices__infrared_cameras_BALTECH_TR_.jpg
  • Infared_camera_BALTECH_TR_0170__2_.jpg
  • BALTECH_TR_55W__BALTECH_TR_75W__BALTECH_TR_95W________________________________________.jpg
  • Infared_camera_BALTECH_infrared_windows_measurement_devices__BALTECH_TR_0180_Zorro__ThermaRed__10_.jpg
BALTECH GmbH - Methodology of energy audit, infrared camera

Energy audits, testing energy-consuming processes, assesses efficiency of energy use. Energy audit (EA) determines the energy saving potential, to identify the source of energy and enables you to develop comprehensive measures to increase energy efficiency.

EO implies:

1. Analytical validation of the real state used by the company supply systems (water, electricity, heat);

2. The assessment of equipment conformity to requirements;

3. Detection of energy loss;

4. Rationing of energy check and energy balance;

5. Calculation of specific power consumption for carrying out specific works.

The stages of energy audit

• Carried out a survey of energy. Diagnostics of technical condition of equipment, checking the status of metering devices, revealed the efficiency of operation, measured plan of modernization. The report, and identifies areas for saving energy;

• To check the object is created the energy passport, based on which a plan of events, performed a feasibility study of the planned operations is carried out registration of the explanatory note and calculations to obtain a passport;

• Prepared methodology of energy audit program and energy conservation. Held control limits on scheduled operations.

Features energy audit

Nonresidential building

Nonresidential building during the examination is not considered as a set of separate rooms. Because these objects all air flows cannot be accounted for. Will have unpredictable influence on each other in different building systems. As an example, note the interaction of the heating and ventilation systems.

Therefore, the required complete comparison is performed of energy efficiency measures against each other. The purpose is to identify their effectiveness. A simple summation often leads to an increase of the calculated results against actual data.

Residential building

Feature survey of residential buildings - the use of passive measures of energy efficiency. Heat loss can be reduced by insulation of attic and walls. Practice shows that in houses of modern construction energy consumption for heating is almost twice less than in the buildings constructed over 10 years ago.

Industrial enterprises

A survey of a particular company is performed individually, because the common methods of energy audit can not exist. The specifics of the EO of the company - definition of rational use of energy resources and their flows.

The heating system

Feature of EC heating systems – large volume. Special attention must be given to heat losses in the system when the transport of energy. Based on the obtained data, to reduce real losses to a minimum. Moreover, this minimum may be below the required standard.

Boiler

When determining power they are considered as objects of increased complexity. Requires a separate test of efficiency in the production of heat. Certain techniques of energy audits allow to optimize the production costs of heat and increase the efficiency of the boiler operation.

Department of Technical Service (OTS) of the company Baltech accredited as a laboratory for thermography and thermal diagnostics (got the certificate in July 2016), offers services in energy audit of any facility.

Kapcsolatfelvétel:
Ingatlanjog