BALTECH VP-3460, monitoring and balancing in the bearings in place

Ár / bérleti díj: 10 000 Ft (HUF)

Rovat: Műszaki cikk, elektronika » Egyéb

Elhelyezkedés: Külföld, Németország, Lübeck | Térkép Megtekintés térképen

A hirdetés feladásának ideje: 2018. 01. 17. 13:18

  • Balancing_of_fans__dynamic_balancing_of_rotors__16_.jpg
  • Balancing_of_fans__dynamic_balancing_of_rotors__8_.jpg
  • Balancing_of_fans__dynamic_balancing_of_rotors__5_.jpg
  • Balancing_of_fans__dynamic_balancing_of_rotors__3_.jpg
BALTECH VP-3460, monitoring and balancing in the bearings in place

The modern process of production of industrial enterprises and different types of plants, implies reliability and durability of operating equipment, units, machinery, etc... To ensure compliance with requirements to the technical condition of rotating machinery and control operating loads in accordance with the conditions of ISO 10816, in such enterprises introduces the vibration. Vibration control should be carried out using a BALTECH VP-3460 - vibration meter-tachometer-balancer-thermometer c program databases maintenance and accessories, with which You will be able to obtain reliable data on all types and classes of aggregates, not only by the mean square value (RMS) vibration velocity but also on acceleration and displacement, with high accuracy and minimum error. The advantage of BALTECH VP-3460 - vibration meter-tachometer-balancer-thermometer c program databases maintenance and accessories is distinguished by low cost (and hence the ROI) of the device, quality and reliability, ease of use, and of course extensive its functionality.

BALTECH VP-3460 - vibration meter-tachometer-balancer-thermometer c program databases maintenance and accessories allows the technician by passing the vibration, to carry out balancing of rotors, vozdukhoduvy, fans, impellers, etc. Of course, balancing the above devices may be carried out on the balancing machine series: BALTECH HBM, BALTECH BALTECH VBM and SBM, but balancing on the spot is advantageous because of the close operating conditions of the mechanisms work, and thus exercise control on the temperature settings and compliance of astnosti, stiffness, speed, etc...

BALTECH VP-3460 - vibration meter-tachometer-balancer-thermometer c program databases maintenance and accessories has a two channel implementation, which allows the vibration and field balancing of complex equipment and machinery. Has modes: vibration meter, Tachometer, phase meter, vibrational analysis (with the help of this function, you can determine the source and type caused by the vibration function equipped with ½ to 9 harmonics of the rotation frequency), the Measurement route (using the software BALTECH-Expert creates a route, passing through which, the expert can examine the time relationships of the recorded signal of each point of measurement), Thermometer (using the contact probe, is a temperature control point to be inspected), Strobe light, Balancing.

For specialists of the industrial enterprises it is important that the balancing in own bearings in place was carried out quickly and easily. Using BALTECH VP-3460 - vibration meter-tachometer-balancer-thermometer c program databases maintenance and accessories, the operator should conduct three simple steps:

- The initial measurement

- Test run (test mass calculation, performed in all the selected points and planes in each point)

- The result (calculation uravnoveshivaya weight and installation angle, the divorce of goods in the corners, enter DKV (for carrying out balancing without trial run)

With the help of unique software BALTECH-Expert - programs maintain databases on the results of the vibration analysis, alignment and thermal imaging surveys definition of a residual resource, You will be able not only to assess the full condition of the units mentioned above, but more details to plan maintenance work, lead to failure, to implement the control procedure to define inspection periodicity, as a calendar date and engine hours.

Kapcsolatfelvétel:
Ingatlanjog